“Full” and “Sub” Values
Information elements with “Full” in their names are calculated on all blocks.
Information elements with “Sub” in their names are calculated only on the blocks known to be sent also when downlink DTX is active (in each 104-multiframe, one TCH block with SID information and one SACCH block).
Similar to RxQual Full & RxQual Sub
Categories
- Alerting (1)
- Assignment Command (1)
- Assignment Complete (1)
- Base Station Identity Code (1)
- BSIC (1)
- Call Proceeding (1)
- Cell Global Identity (1)
- CGI (1)
- Ciphering Mode Command (1)
- Ciphering Mode Complete (1)
- Classes of GPRS services (1)
- Classmark Change (1)
- CM Call Event (1)
- CM Service Request (2)
- Connect Acknowledge (1)
- edge (1)
- Full Value (1)
- gprs (1)
- GPRS Handset Classes (1)
- GPRS MAC State (1)
- GPRS Suspension Request (1)
- GRR Cell Reselection Measurement (1)
- GSM RR Channel Configuration (1)
- GSM RR State (1)
- Gsm Surrounded Cell Ba List (1)
- Handover Command (1)
- Handover Complete (1)
- IMEI (1)
- Immediate Assignment (1)
- International Mobile station Equipment Identity (1)
- Key Performance Indicators (1)
- KPI (1)
- LAI (1)
- Layer 3 - Connect (1)
- Layer 3 - Measurement Information (1)
- Layer 3 Call Attempt - Setup (1)
- LN (1)
- Location Area Identity (1)
- Location Number (1)
- Mobile Station Roaming Number (1)
- MSRN (1)
- Radio Link Time-Out (1)
- RLINKT (1)
- SDCCH Drop Call Reason (1)
- Sub Value (1)
- System Information Type 5 (1)
- System Information Type 5ter (1)
- System Information Type 6 (1)
- TCH Drop Call Reason (1)
- Temporary Mobile Subscriber Identity (1)
- TMSI (1)
Total Pageviews
Text Widget
GSM GPRS EDGE Technology
Sunday, December 11, 2011
Subscribe to:
Post Comments (Atom)
Download GSM GPRS EDGE Guide for RF Engineer
Popular Posts
-
GPRS Suspension Request Time : 16:49:15.840 Vendor Header Length : 28 Log Code (Hex) : 0x512F HW Timestamp : (64216941.25 ms) 17:50:16...
-
Location Area Identity (LAI) LAI is used for location updating of mobile subscribers. LAI = MCC + MNC + LAC MCC = Mobile Country Code (3 dig...
-
System Information Type 3 Time : 15:01:19.914 Vendor Header ARFCN : 117 (E-GSM) L2 pseudo length : 18 Skip indicator : 0 Protocol discri...
-
Cell Global Identity (CGI) CGI is used for cell identification within the GSM network. This is done by adding a Cell Identity (CI) to the lo...
-
“Full” and “Sub” Values Information elements with “Full” in their names are calculated on all blocks . Information elements with “Sub” in th...
-
Paging Request Type 3 Time : 15:01:05.623 Vendor Header DL Signalling Counter Max : 45 DL Signalling Counter Current : 45 L2 pseudo le...
-
1. CSSR (CALL SETUP SUCCESS RATE) Definition: Rate of calls going until TCH successful assignment 2. SCR (SUCCESSFULL CALL RATE) Definition:...
-
Connect Acknowledge Time : 16:49:20.681 Vendor Header Length : 19 Log Code (Hex) : 0x713A HW Timestamp : (64221775.00 ms) 17:50:21.775...
-
CM Service Request Time : 16:49:15.372 Vendor Header Length : 30 Log Code (Hex) : 0x713A HW Timestamp : (64216447.50 ms) 17:50:16.448 ...
-
Classmark Change Time : 16:49:15.840 Vendor Header Length : 31 Log Code (Hex) : 0x512F HW Timestamp : (64216940.00 ms) 17:50:16.940 ...
0 comments:
Post a Comment