Assignment Command

Assignment Command

Time : 16:49:17.491
Vendor Header
Length : 36
Log Code (Hex) : 0x512F
HW Timestamp : (64218587.50 ms) 17:50:18.588
1.25 ms fraction : 0.00
CFN : 144
1.25 ms counter : 805506734870
Channel type : (128) DL DCCH
Message type : Assignment Command
Length : 21
Skip indicator : 0
Protocol discriminator : (6) Radio resources management messages
Message type : 46
Description of the first channel, after time
Channel type : (2) TCH/H + ACCHs
Subchannel : 0
Timeslot number (TN) : 0
Training sequence code (TSC) : 3
Hopping RF channel : (1) RF Hopping Channel
Mobile allocation index offset (MAIO) : 2
Hopping sequence number (HSN) : 2
Power command
Enhanced power control (EPC) : (0) Channel(s) not in EPC mode
Fast measurement reporting and power control (FPC) : (0) FPC not in use
Power level : 0
Frequency list, after time
Length : 3
Variable bitmap
Channels : 558 559 560
Mode of the first channel (channel set 1)
Mode : (65) Speech full rate or half rate version 3 - FR AMR or HR AMR
Multi-Rate Configuration
Multirate speech version : (1) Adaptive Multirate speech version 1 - FR AMR, HR AMR or OHR AMR
Noice Suppression Control Bit (NSCB) : (0) Noise Suppression can be used (default)
Initial Codec Mode Indicator (ICMI) : (0) The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009
Start Mode : (0) CODEC_MODE_1 (Represents the lowest codec mode (lowest bit-rate) of the ACS)
Set of AMR codec modes
Set of AMR Codec Modes :
7.40 kbit/s codec rate is part of the subset
6.70 kbit/s codec rate is part of the subset
5.90 kbit/s codec rate is part of the subset
4.75 kbit/s codec rate is part of the subset
Threshold 1 : (23) 11.5 dB
Hysteresis 1 : (3) 1.5 dB
Threshold 2 : (28) 14.0 dB
Hysteresis 2 : (4) 2.0 dB
Threshold 3 : (32) 16.0 dB
Hysteresis 3 : (4) 2.0 dB