System Information Type 13

System Information Type 13

Time : 15:01:24.134
Vendor Header
ARFCN : 526 (GSM 1800)
L2 pseudo length : 0
Skip indicator : 0
Protocol discriminator : (6) Radio resources management messages
Message type : 0
Rest octets
BCCH CHANGE MARK : 7
SI CHANGE FIELD : (0) Update of unspecified SI message or SI messages
PBCCH not present in cell
Routing area code (RAC) : 1 (Hex 0x01)
SPGC CCCH SUP : (0) SPLIT PG CYCLE is not supported on CCCH in this cell
PRIORITY ACCESS THR : (6) Packet access is allowed for priority level 1 to 4
NETWORK CONTROL ORDER : (0) NC0: MS controlled cell re-selection, no measurement reporting
GPRS cell options
NMO : (1) Network mode of operation II
T3168 : (0) 500 milliseconds
T3192 : (7) 200 milliseconds
DRX TIMER MAX : (7) 64 s
ACCESS BURST TYPE : (0) 8 bit access burst shall be used
CONTROL ACK TYPE : (1) Default format is RLC/MAC control block
BS CV MAX : 6
PAN DEC : 1
PAN INC : 2
PAN MAX : Maximum value allowed for counter N3102 is 20
Extension information
EGPRS support : (1) EGPRS supported in this cell
EGPRS_PACKET_CHANNEL_REQUEST : (1) Two phase packet access with 'Packet Channel Request' shall be used on PRACH, or 'Channel Request' on RACH.
BEP_PERIOD : 5
PFC_FEATURE_MODE : (0) The network does not support packet flow context procedures.
DTM_SUPPORT : (0) The cell does not support DTM procedures.
BSS_PAGING_COORDINATION : (0) The cell does not support CS paging co-ordination.
CCN_ACTIVE : (1) CCN is enabled in the cell.
NW_EXT_UTBF : (1) Extended uplink TBF mode is supported.
MULTIPLE_TBF_CAPABILITY : (0) The cell does not support multiple TBF procedures
EXT_UTBF_NO_DATA : (1) The mobile station may refrain from sending a PACKET UPLINK DUMMY CONTROL BLOCK message when there is no other RLC/MAC block ready to send in an uplink radio block allocated by the network
DTM_ENHANCEMENTS_CAPABILITY : (0) The cell does not support enhanced DTM CS establishment and enhanced DTM CS release procedures
MBMS procedures not supported by the cell
GPRS Power Control Parameters
Alpha : (4) 0.4
T AVG W : 12
T AVG T : 10
PC MEAS CHAN : (0) Downlink measurements for power control shall be made on BCCH
N AVG I : 2
SGSNR : (1) SGSN R99 or onwards
SI Status indication : (1) The network supports 'Packet SI Status' message