tag:blogger.com,1999:blog-40268289464140472142023-11-15T07:45:48.588-08:00GSM GPRS EDGEGSM GPRS EDGE Optimization GuideGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.comBlogger67125tag:blogger.com,1999:blog-4026828946414047214.post-36396836274583621632014-11-26T19:18:00.004-08:002014-11-26T19:18:42.218-08:00Different between GPRS Class 10 and GPRS Class 32This is also related to Sony Ericsson W995 and Nokia C7 specification.
A multislot allocation is represented as, for example, 5+2. The first number is the number of downlink timeslots and the second is the number of uplink timeslots allocated for use by the mobile station. A commonly used value is class 10 for many GPRS/EGPRS mobiles which uses a maximum of 4 timeslots in downlink direction and 2 timeslots in uplink direction.
However simultaneously a maximum number of 5 simultaneous timeslots can be used in both uplink and downlink. The network will automatically configure the for either 3+2 or 4+1 operation depending on the nature of data transfer.
Some high end mobiles, usually also supporting UMTS also support GPRS/EDGE multislot class 32. According to 3GPP TS 45.002 (Release 6), Table B.2, mobile stations of this class support 5 timeslots in downlink and 3 timeslots in uplink with a maximum number of 6 simultaneously used timeslots.
If data traffic is concentrated in downlink direction the network will configure the connection for 5+1 operation. When more data is transferred in the uplink the network can at any time change the constellation to 4+2 or 3+3. Under the best reception conditions, i.e. when the best EDGE modulation and coding scheme can be used, 5 timeslots can carry a bandwidth of 5*59.2 kbit/s = 296 kbit/s. In uplink direction, 3 timeslots can carry a bandwidth of 3*59.2 kbit/s = 177.6 kbit/s»
==> class 10 ~= (at most) 236.8 kbps ~= 29 KB/s
==> class 32 ~= (at most) 296 kbps = 37 KB/s
that's best of case situation; depending on your provider, the speed can and most likely will be lower.GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-5139882438136312142011-12-11T16:54:00.000-08:002011-12-11T16:55:46.355-08:00Common misunderstandings about EDGECommon misunderstandings about EDGE:<br /><br />• GPRS and EDGE are two different technologies<br /><br />• EDGE uses a modulation that is very sensitive to poor radio conditions<br />• EDGE and GPRS have almost the same throughput<br />• EDGE needs more sites than GSM/GPRS due to worse coverage performance<br />• EDGE requires major network upgrades<br />• There is no need for EDGE in Europe where WCDMA is being deployedGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-34987888512115602622011-12-11T16:52:00.000-08:002011-12-11T16:53:15.030-08:00Classes of GPRS services<span style="font-weight:bold;">Classes of GPRS services</span><br /><br />Mobile devices can request different types of traffic to be prioritised in an attempt to give the user their desired level of connectivity. <br /><br />There are 4 types of class:<br /><br />Precedence Class<br />An application can be assigned a Precedence Class 1, 2 or 3. If an application has a higher precedence (1) than another (3) then its traffic will be given a higher priority.<br /><br />Delay Class<br />Applications can request predictive delay classes which guarantee an average and 95-percentile delay. There are 4 classes, 1 being the fastest.<br /><br />Reliability class<br />Applications can request differing levels of reliability for its data depending on its tolerance to data loss.<br /><br />Throughput Class<br />Applications can choose different profiles for throughput. There are 2 distinctions in class, peak and mean. Peak throughput class is used mainly for bursty transmissions with a variable in octets per second describing the throughput required for burst of specified size. Mean is the average data transfer rate over a period of time measured in octets per hour.<br /><br />Other factors can affect QoS. Things like Radio quality, basic LAN / WAN and Internet congestion, faults on GSM and GPRS network’ etc.GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-21615350719379658562011-12-11T16:49:00.001-08:002011-12-11T16:50:45.797-08:00GPRS Handset ClassesGPRS Handset Classes<br /><br />GPRS devices are not as straightforward as you may think. There are in fact 3 different classes of device.<br /><br /><span style="font-weight:bold;">Class A<span style="font-weight:bold;"></span></span><br /><br />Class A terminals have 2 transceivers which allow them to send / receive data and voice at the same time. This class of device takes full advantage of GPRS and GSM. You can be taking a call and receiving data all at the same time.<br /><br /><span style="font-weight:bold;">Class B</span><br /><br />Class B devices can send / receive data or voice but not both at the same time. Generally if you<br />are using GPRS and you receive a voice call you will get an option to answer the call or carry on.<br /><br /><span style="font-weight:bold;">Class C<span style="font-weight:bold;"></span></span><br /><br />This device only allows one means of connectivity. An example would be a GPRS PCMCIA card in a laptop.GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-57938723273273977112011-12-11T16:38:00.000-08:002011-12-11T16:39:46.250-08:00Meaning of RxLev Full and RxLev Sub“Full” and “Sub” Values<br /><br />Information elements with “Full” in their names are <span style="font-weight:bold;">calculated on all blocks</span>.<br /><br />Information elements with “Sub” in their names are calculated only on the blocks known to be sent also when downlink DTX is active (in each 104-multiframe, one TCH block with SID information and one SACCH block).<br /><br />Similar to RxQual Full & RxQual SubGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-87593879074894845862011-12-09T00:31:00.003-08:002011-12-09T00:31:32.369-08:00Layer 3 - Measurement Information<span style="font-weight:bold;">Measurement Information</span><br /><br />Time : 16:49:15.996<br />Vendor Header<br /> Length : 36<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64217087.50 ms) 17:50:17.088<br /> 1.25 ms fraction : 0.00<br /> CFN : 140<br /> 1.25 ms counter : 805506733670<br /> Channel type : (132) DL SACCH<br /> Message type : Unknown RR message<br /> Length : 21<br />Short Protocol discriminator : 0<br />Message type : 5<br />Short L2 Header : 0<br />BCCH allocation sequence number indication : 0<br />3G Sequence Number : 0<br />measurement parameters change mark : 0<br />MI_INDEX : 1<br />MI_COUNT : 3<br />Power control indicator : (0) PWRC is not set<br />Report type : (1) The MS shall use the Measurement Report message for reporting<br />Reporting Rate : (0) SACCH rate reporting<br />Invalid Bsic Reporting : (0) Report on cells with invalid BSIC and allowed NCC part of BSIC is not allowed<br />3G neighbor cell description<br /> Index start 3G : 8<br /> Absolute index start EMR : Not present<br /> FDD Description<br /> Neighbors : <br /> [0 ] : <br /> FDD ARFCN : 487<br /> Fdd_Indic0 : 0<br /> NR_OF_FDD_CELLS : 12<br /> Cell information : <br /> [0 ] : Scrambling code : 194 Diversity : 0<br /> [1 ] : Scrambling code : 206 Diversity : 0<br /> [2 ] : Scrambling code : 211 Diversity : 0<br /> [3 ] : Scrambling code : 212 Diversity : 0<br /> [4 ] : Scrambling code : 215 Diversity : 0<br /> [5 ] : Scrambling code : 216 Diversity : 0<br /> [6 ] : Scrambling code : 217 Diversity : 0<br /> [7 ] : Scrambling code : 220 Diversity : 0<br /> [8 ] : Scrambling code : 221 Diversity : 0<br /> [9 ] : Scrambling code : 226 Diversity : 0<br /> [10] : Scrambling code : 260 Diversity : 0<br /> [11] : Scrambling code : 270 Diversity : 0GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-21939217284937180822011-12-08T01:38:00.000-08:002011-12-09T01:39:14.828-08:00GSM RR Channel Configuration<span style="font-weight:bold;">GSM RR Channel Configuration</span><br /><br />Time : 16:49:15.559<br />Length : 33<br />Log Code (Hex) : 0x5135<br />HW Timestamp : (64216658.75 ms) 17:50:16.659<br /> 1.25 ms fraction : 0.00<br /> CFN : 56<br /> 1.25 ms counter : 805506733327<br />Number of Dedicated Channels : 1<br />Dtx Indicator : (0) Off<br />Max Tx Power Level Allowed : 3<br />Starting Time Valid : (0) No<br />Starting Time : 0<br />Cipher Flag : (0) Off<br />Cipher Algorithm : (0) Cipher with algorithm A5/1<br />Channel Mode 1 : (0) Signalling only<br />Channel Mode 2 : Not valid<br />Channel Type : (3) SDCCH/8<br />Subchannel : 0<br />Timeslot Number : 1<br />Training Sequence Code : 0<br />Hopping : (0) No<br />MAIO : Invalid<br />HSN : Invalid<br />Number of Hopping Frequencies : 1<br />ARFCN/TCH : <br /> [0 ] : <br /> ARFCN : 575 <br />Before Channel Config Present : (0) NoGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-62994821678483316412011-12-08T01:37:00.000-08:002011-12-09T01:38:05.364-08:00GSM RR State<span style="font-weight:bold;">GSM RR State</span><br /><br />Time : 16:49:15.372<br />Length : 16<br />Log Code (Hex) : 0x512C<br />HW Timestamp : (64216450.00 ms) 17:50:16.450<br /> 1.25 ms fraction : 0.00<br /> CFN : 120<br /> 1.25 ms counter : 805506733160<br />RR State : RR Connection Pending<br />Mode : N/AGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-539828117239365992011-12-08T01:36:00.001-08:002011-12-09T01:37:16.280-08:00GPRS MAC State<span style="font-weight:bold;">GPRS MAC State</span><br /><br />Time : 16:49:15.372<br />Length : 16<br />Log Code (Hex) : 0x5227<br />HW Timestamp : (64216448.75 ms) 17:50:16.449<br /> 1.25 ms fraction : 0.00<br /> CFN : 12<br /> 1.25 ms counter : 805506733159<br />MAC Mode : (0) Null<br />Substate : (2) NULL_SUSPENDEDGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-22605446146882126922011-12-08T01:36:00.000-08:002011-12-09T01:36:37.894-08:00CM Call Event<span style="font-weight:bold;">CM Call Event</span><br /><br />Time : 16:49:15.372<br />Length : 353<br />Log Code (Hex) : 0x12C1<br />HW Timestamp : (64216442.83853 ms) 17:50:16.443<br /> 1.25 ms fraction : 0.27083<br /> 1.25 ms counter : 805506733154<br />Version : 1<br />Call event : (0) Phone originated a call<br />CallClientId : 0<br />CallId : 0<br />Call state : Origination<br />Call type : Voice<br />Dialled number<br /> Text buffer : 7145805112<br /> Length : 10<br />Number type : (0) Unknown number type<br />Numbering plan : (1) ISDN/telephony numbering plan (CCITT E.164 and CCITT E.163)<br />Subaddress type : n/a<br />Redirecting number<br /> Dialled number<br /> Text buffer<br /> Length : 0<br /> Number type : (0) Unknown number type<br /> Numbering plan : (0) Unknown number plan<br /> Subaddress type : n/a<br />Redirecting reason : (0) Unknown<br />Alpha presentation<br /> Text buffer<br /> Length : 0<br />signal<br />End status : (4294967295) Undefined value<br />NumCallsEnded : 1<br />CallEndParams<br /> CallId : 0<br /> InfoType : 2<br /> QualcommCmCallEvent_EndParams_GW_PS<br /> NSAPI_Valid : 0<br /> TI_Valid : 173<br /> TearDownIndicator : 222<br /> SM_Cause : 1<br />System mode : No service<br />CallConnectTime : 0<br />CallEndTime : 0<br />Bytes received (PS data call) : 0<br />Bytes transmitted (PS data call) : 0<br />Line used (voice call) : Line #0<br />RequestingClientId : 11<br />MsmId : 0<br />Direction : (1) Mobile-originated callGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-90948284448144709802011-12-08T01:33:00.001-08:002011-12-09T01:34:30.629-08:00Gsm Surrounded Cell Ba List<span style="font-weight:bold;">Gsm Surrounded Cell Ba List<span style="font-weight:bold;"></span></span><br /><br />Time : 16:48:56.152<br />Length : 85<br />Log Code (Hex) : 0x5071<br />HW Timestamp : (64197255.00 ms) 17:49:57.255<br /> 1.25 ms fraction : 0.00<br /> CFN : 96<br /> 1.25 ms counter : 805506717804<br />Cell Count : 6<br />N Cell Information : <br /> [0 ] : <br /> BCCH ARFCN : 159 [850]<br /> Last Averaged Received Power : (-1187) -74.18 dBm<br /> BSIC Known : 1<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 7<br /> Relative time offset to serving cell timing within frame : 4995<br /> [1 ] : <br /> BCCH ARFCN : 550 [1900]<br /> Last Averaged Received Power : (-1214) -75.87 dBm<br /> BSIC Known : 0<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 2715647<br /> Relative time offset to serving cell timing within frame : -1254<br /> [2 ] : <br /> BCCH ARFCN : 553 [1900]<br /> Last Averaged Received Power : (-1226) -76.62 dBm<br /> BSIC Known : 0<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 2715639<br /> Relative time offset to serving cell timing within frame : -1<br /> [3 ] : <br /> BCCH ARFCN : 540 [1900]<br /> Last Averaged Received Power : (-1244) -77.75 dBm<br /> BSIC Known : 0<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 0<br /> Relative time offset to serving cell timing within frame : 0<br /> [4 ] : <br /> BCCH ARFCN : 548 [1900]<br /> Last Averaged Received Power : (-1245) -77.81 dBm<br /> BSIC Known : 0<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 0<br /> Relative time offset to serving cell timing within frame : 0<br /> [5 ] : <br /> BCCH ARFCN : 576 [1900]<br /> Last Averaged Received Power : (-1267) -79.18 dBm<br /> BSIC Known : 0<br /> BSIC : 0-0<br /> Relative frame number offset to serving cell FN : 0<br /> Relative time offset to serving cell timing within frame : 0GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-42637738047253663822011-12-08T01:33:00.000-08:002011-12-09T01:33:44.359-08:00GRR Cell Reselection Measurement<span style="font-weight:bold;">GRR Cell Reselection Measurement</span><br /><br />Time : 16:48:55.700<br />Length : 188<br />Log Code (Hex) : 0x51FC<br />HW Timestamp : (64196785.00 ms) 17:49:56.785<br /> 1.25 ms fraction : 0.00<br /> CFN : 168<br /> 1.25 ms counter : 805506717428<br />Serving BCCH ARFCN : 575 [1900]<br />Serving PBCCH ARFCN : 0 <br />Serving Priority Class : 0<br />Serving RxLev Average : 40<br />Serving C1 : 40<br />Serving C2 : 40<br />Serving C31 : 0<br />Serving C32 : 0<br />Serving Five Second Timer : 0 - Stopped<br />Cell Reselect Status : 0 - Serving Cell Not Barred for Reselection<br />Recent Cell Selection : 0 - No Cell Reselection in last 15 sec<br />Number of Neighbors : 1<br />Neighbor cells : <br /> [0 ] : <br /> BCCH ARFCN : 159 [850]<br /> PBCCH ARFCN : 0 <br /> Priority Class : 0<br /> RxLev Average : 37<br /> C1 : 37<br /> C2 : 37<br /> C31 : 0<br /> C32 : 0<br /> Five Second Timer : 0 - Stopped<br /> Cell Reselect Status : 0 - Neighbor Cell Not Barred for Reselection<br /> Serving RA : 1 - Neighbor Cell belongs to Servings Cell's RAGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-69199988473940539582011-12-08T00:46:00.000-08:002011-12-09T00:46:44.474-08:00Assignment Complete<span style="font-weight:bold;">Assignment Complete</span><br /><br />Time : 16:49:17.506<br />Vendor Header<br /> Length : 18<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64218597.50 ms) 17:50:18.598<br /> 1.25 ms fraction : 0.00<br /> CFN : 140<br /> 1.25 ms counter : 805506734878<br /> Channel type : (0) UL DCCH<br /> Message type : Assignment Complete<br /> Length : 3<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 41<br />RR cause<br /> Value : (0) Normal eventGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-78478732083639601402011-12-08T00:45:00.000-08:002011-12-09T00:46:10.774-08:00Assignment Command<span style="font-weight:bold;">Assignment Command</span><br /><br />Time : 16:49:17.491<br />Vendor Header<br /> Length : 36<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64218587.50 ms) 17:50:18.588<br /> 1.25 ms fraction : 0.00<br /> CFN : 144<br /> 1.25 ms counter : 805506734870<br /> Channel type : (128) DL DCCH<br /> Message type : Assignment Command<br /> Length : 21<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 46<br />Description of the first channel, after time<br /> Channel type : (2) TCH/H + ACCHs<br /> Subchannel : 0<br /> Timeslot number (TN) : 0<br /> Training sequence code (TSC) : 3<br /> Hopping RF channel : (1) RF Hopping Channel<br /> Mobile allocation index offset (MAIO) : 2<br /> Hopping sequence number (HSN) : 2<br />Power command<br /> Enhanced power control (EPC) : (0) Channel(s) not in EPC mode<br /> Fast measurement reporting and power control (FPC) : (0) FPC not in use<br /> Power level : 0<br />Frequency list, after time<br /> Length : 3<br /> Variable bitmap<br /> Channels : 558 559 560 <br />Mode of the first channel (channel set 1)<br /> Mode : (65) Speech full rate or half rate version 3 - FR AMR or HR AMR<br />Multi-Rate Configuration<br /> Multirate speech version : (1) Adaptive Multirate speech version 1 - FR AMR, HR AMR or OHR AMR<br /> Noice Suppression Control Bit (NSCB) : (0) Noise Suppression can be used (default)<br /> Initial Codec Mode Indicator (ICMI) : (0) The initial codec mode is defined by the implicit rule provided in 3GPP TS 45.009<br /> Start Mode : (0) CODEC_MODE_1 (Represents the lowest codec mode (lowest bit-rate) of the ACS)<br /> Set of AMR codec modes<br /> Set of AMR Codec Modes : <br /> 7.40 kbit/s codec rate is part of the subset<br /> 6.70 kbit/s codec rate is part of the subset<br /> 5.90 kbit/s codec rate is part of the subset<br /> 4.75 kbit/s codec rate is part of the subset<br /> Threshold 1 : (23) 11.5 dB<br /> Hysteresis 1 : (3) 1.5 dB<br /> Threshold 2 : (28) 14.0 dB<br /> Hysteresis 2 : (4) 2.0 dB<br /> Threshold 3 : (32) 16.0 dB<br /> Hysteresis 3 : (4) 2.0 dBGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-24295481688433840282011-12-08T00:35:00.000-08:002011-12-09T00:36:02.522-08:00Ciphering Mode Complete<span style="font-weight:bold;">Ciphering Mode Complete</span><br /><br />Time : 16:49:16.089<br />Vendor Header<br /> Length : 28<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64217180.00 ms) 17:50:17.180<br /> 1.25 ms fraction : 0.00<br /> CFN : 80<br /> 1.25 ms counter : 805506733744<br /> Channel type : (0) UL DCCH<br /> Message type : Ciphering Mode Complete<br /> Length : 13<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 50<br />Mobile identity<br /> Odd/even indication : (0) Even number of digits<br /> Type of identity : (3) IMEISV<br /> Identity digits (BCD) : 0108510035472700GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-62051211569412589362011-12-08T00:34:00.001-08:002011-12-09T00:38:39.183-08:00Connect Acknowledge<span style="font-weight:bold;">Connect Acknowledge</span><br /><br />Time : 16:49:20.681<br />Vendor Header<br /> Length : 19<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64221775.00 ms) 17:50:21.775<br /> 1.25 ms fraction : 0.00<br /> CFN : 108<br /> 1.25 ms counter : 805506737420<br /> Direction : (1) To network<br /> Message length : 2<br />Transaction identifier : 0<br />Protocol discriminator : (3) Call control; call related SS messages<br />Message type : 15GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-55491309010784811002011-12-08T00:34:00.000-08:002011-12-09T00:34:21.269-08:00Ciphering Mode Command<span style="font-weight:bold;">Ciphering Mode Command<span style="font-weight:bold;"></span></span><br /><br />Time : 16:49:16.074<br />Vendor Header<br /> Length : 18<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64217176.25 ms) 17:50:17.176<br /> 1.25 ms fraction : 0.00<br /> CFN : 20<br /> 1.25 ms counter : 805506733741<br /> Channel type : (128) DL DCCH<br /> Message type : Ciphering Mode Command<br /> Length : 3<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 53<br />Cipher Response<br /> CR : (1) IMEISV shall be included<br />Cipher Mode Setting<br /> Algorithm ID : Cipher with algorithm A5/1<br /> SC : (1) Start cipheringGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-83694422748241047052011-12-08T00:33:00.000-08:002011-12-09T00:38:01.771-08:00Layer 3 - Connect<span style="font-weight:bold;">Connect</span><br /><br />Time : 16:49:20.681<br />Vendor Header<br /> Length : 19<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64221773.75 ms) 17:50:21.774<br /> 1.25 ms fraction : 0.00<br /> CFN : 116<br /> 1.25 ms counter : 805506737419<br /> Direction : (0) From network<br /> Message length : 2<br />Transaction identifier : 8<br />Protocol discriminator : (3) Call control; call related SS messages<br />Message type : 7GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-49474514611360040742011-12-08T00:32:00.000-08:002011-12-09T00:37:10.863-08:00Alerting<span style="font-weight:bold;">Alerting</span><br /><br />Time : 16:49:19.004<br />Vendor Header<br /> Length : 23<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64220093.75 ms) 17:50:20.094<br /> 1.25 ms fraction : 0.00<br /> CFN : 108<br /> 1.25 ms counter : 805506736075<br /> Direction : (0) From network<br /> Message length : 6<br />Transaction identifier : 8<br />Protocol discriminator : (3) Call control; call related SS messages<br />Message type : 1<br />Progress indicator<br /> Coding standard : (3) Standard defined for the GSM PLMNS<br /> Location : (2) Public network serving the local user<br /> Progress description : (8) In-band information or appropriate pattern now availableGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-56195151444555885452011-12-08T00:31:00.001-08:002011-12-09T00:42:41.292-08:00Call Proceeding<span style="font-weight:bold;">Call Proceeding</span><br /><br />Time : 16:49:17.022<br />Vendor Header<br /> Length : 19<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64218117.50 ms) 17:50:18.118<br /> 1.25 ms fraction : 0.00<br /> CFN : 100<br /> 1.25 ms counter : 805506734494<br /> Direction : (0) From network<br /> Message length : 2<br />Transaction identifier : 8<br />Protocol discriminator : (3) Call control; call related SS messages<br />Message type : 2GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-4933186696935433162011-12-08T00:31:00.000-08:002011-12-09T00:32:50.549-08:00Layer 3 Call Attempt - Setup<span style="font-weight:bold;">Setup</span><br /><br />Time : 16:49:16.089<br />Vendor Header<br /> Length : 39<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64217181.25 ms) 17:50:17.181<br /> 1.25 ms fraction : 0.00<br /> CFN : 112<br /> 1.25 ms counter : 805506733745<br /> Direction : (1) To network<br /> Message length : 22<br />Transaction identifier : 0<br />Protocol discriminator : (3) Call control; call related SS messages<br />Message type : 5<br />Bearer capability 1<br /> Radio channel requirement : (3) The MS supports at least full rate speech version 1 and half rate speech version 1. The MS has a greater preference for full rate speech version 1.<br /> Coding standard : (0) GSM standardized coding as described below<br /> Transfer mode : (0) circuit mode<br /> Information transfer capability : (0) speech<br /> Coding : (0) octet used for extension of information transfer capability<br /> CTM : (0) CTM text telephony is not supported<br /> Speech version indication : (4) GSM full rate speech version 3<br /> Octet(s) 3b etc : <br /> [0 ] : <br /> Coding : (0) octet used for extension of information transfer capability<br /> Speech version indication : (2) GSM full rate speech version 2<br /> [1 ] : <br /> Coding : (0) octet used for extension of information transfer capability<br /> Speech version indication : (0) GSM full rate speech version 1<br /> [2 ] : <br /> Coding : (0) octet used for extension of information transfer capability<br /> Speech version indication : (5) GSM half rate speech version 3<br /> [3 ] : <br /> Coding : (0) octet used for extension of information transfer capability<br /> Speech version indication : (1) GSM half rate speech version 1<br />Called party BCD number<br /> Type of number : (0) Unknown<br /> Numbering plan identification : (1) ISDN/telephony numbering plan (Rec. E.164/E.163)<br /> Number : 7145805112<br />CC Capabilities<br /> Maximum number of supported bearers : 1 bearer supported<br /> ENICM : (0) The mobile station does not support Enhanced Network-initiated In-Call Modification<br /> PCP : (0) The mobile station does not support the Prolonged Clearing Procedure.<br /> DTMF : (1) The mobile station supports DTMF.<br /> Maximum number of speech bearers : 0GPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-10119543083281096962011-12-07T00:28:00.000-08:002011-12-09T00:29:14.781-08:00GPRS Suspension Request<span style="font-weight:bold;">GPRS Suspension Request</span><br /><br />Time : 16:49:15.840<br />Vendor Header<br /> Length : 28<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64216941.25 ms) 17:50:16.941<br /> 1.25 ms fraction : 0.00<br /> CFN : 24<br /> 1.25 ms counter : 805506733553<br /> Channel type : (0) UL DCCH<br /> Message type : GPRS Suspension Request<br /> Length : 13<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 52<br />TLLI : 3258133598 (Hex 0xC2332C5E) (Local TLLI)<br />Routing area identification<br /> Mobile country code (MCC) : 310<br /> Mobile network code (MNC) : 980<br /> Location area code (LAC) : 8600 (Hex 0x2198)<br /> Routing area code (RAC) : 1 (Hex 0x01)<br />Suspension cause<br /> Value : (0) Emergency call, mobile originating call or call re-establishmentGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-68571352244567362422011-12-07T00:27:00.000-08:002011-12-09T00:28:02.431-08:00Classmark Change<span style="font-weight:bold;">Classmark Change<span style="font-weight:bold;"></span></span><br /><br />Time : 16:49:15.840<br />Vendor Header<br /> Length : 31<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64216940.00 ms) 17:50:16.940<br /> 1.25 ms fraction : 0.00<br /> CFN : 148<br /> 1.25 ms counter : 805506733552<br /> Channel type : (0) UL DCCH<br /> Message type : Classmark Change<br /> Length : 16<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 22<br />Mobile Station Classmark 2<br /> Revision level : (2) Mobile station supporting R99 or later versions of the protocol<br /> ES IND : (1) "Controlled Early Classmark Sending" option is implemented in the MS<br /> A5/1 : (0) Encryption algorithm A5/1 available<br /> RF Power Capability : (0) class 1<br /> PS capability (pseudo-synchronization capability) : (1) PS capability present<br /> SS Screening Indicator (defined in TS 24.080) : 1<br /> SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS<br /> VBS notification reception : (0) No VBS capability or no notifications wanted<br /> VGCS notification reception : (0) No VGCS capability or no notifications wanted<br /> FC Frequency Capability : (0) (GSM900 only:) The MS does not support E-GSM or R-GSM<br /> CM3 : (1) The MS supports options that are indicated in classmark 3 IE<br /> LCS VA capability : (0) LCS value added location request notification capability not supported<br /> UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2.<br /> SoLSA : (0) The ME does not support SoLSA.<br /> CMSP: CM Service Prompt : (1) "Network initiated MO CM connection request" supported for at least one CM protocol.<br /> A5/3 : (0) Encryption algorithm A5/3 not available<br /> A5/2 : (1) Encryption algorithm A5/2 available<br />Mobile station classmark 3<br /> Multiband supported : (6) E-GSM/R-GSM + GSM 1800<br /> A5 bits<br /> A5/7 : (0) Encryption algorithm A5/7 not available<br /> A5/6 : (0) Encryption algorithm A5/6 not available<br /> A5/5 : (0) Encryption algorithm A5/5 not available<br /> A5/4 : (0) Encryption algorithm A5/4 not available<br /> Associated radio capability 2 : 1<br /> Associated radio capability 1 : 4<br /> R support : R-GSM not supported<br /> Multislot class : 10<br /> UCS2 treatment : (0) The ME has a preference for the default alphabet<br /> Extended measurement capability : (0) The MS does not support Extended Measurements<br /> ECSD multislot class : 10<br /> ECSD Struct<br /> Modulation capability : (1) 8-PSK supported for uplink transmission and downlink reception<br /> EDGE RF power capability (400/850/900) : (2) Power class E2<br /> EDGE RF power capability (1800/1900) : (2) Power class E2<br /> GSM 850 associated radio capability : 4<br /> GSM 1900 associated radio capability : 1<br /> UMTS FDD radio access technology capability : (0) UMTS FDD not supported<br /> UMTS TDD radio access technology capability : (0) UMTS TDD not supported<br /> CDMA 2000 radio access technology capability : (0) CDMA2000 not supported<br /> UMTS 1.28 Mcps TDD radio access technology capability : (0) UMTS 1.28 Mcps TDD not supported<br /> GERAN feature package 1 : (1) GERAN feature package 1 supported<br /> GERAN Iu mode supported : (0) GERAN Iu mode not supported<br /> GERAN feature package 2 : (0) GERAN feature package 2 not supported<br /> GMSK multislot power profile : 0<br /> 8-PSK multislot power profile : 0<br /> Downlink Advanced Receiver Performance : (0) Downlink Advanced Receiver Performance not supported<br /> DTM Enhancements Capability : (0) The mobile station does not support enhanced DTM CS establishment and enhanced DTM CS release procedures<br /> Repeated ACCH Capability : (0) The mobile station does not support Repeated SACCHGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-72286017096555589982011-12-07T00:26:00.000-08:002011-12-09T00:27:00.266-08:00Immediate Assignment<span style="font-weight:bold;">Immediate Assignment</span><br /><br />Time : 16:49:15.559<br />Vendor Header<br /> Length : 38<br /> Log Code (Hex) : 0x512F<br /> HW Timestamp : (64216657.50 ms) 17:50:16.658<br /> 1.25 ms fraction : 0.00<br /> CFN : 160<br /> 1.25 ms counter : 805506733326<br /> Channel type : (131) DL CCCH<br /> Message type : Immediate Assignment<br /> Length : 23<br /> L2 Header<br /> L2 Length field<br /> Length : 11<br /> M (More data bit) : 0<br /> EL (Length indicator field extension bit) : 1<br />Skip indicator : 0<br />Protocol discriminator : (6) Radio resources management messages<br />Message type : 63<br />Two-message assignment (TMA) : (0) No meaning<br />Downlink assignment to mobile in packet idle mode : (0) No meaning<br />TBF or dedicated mode (T/D) : (0) Assigns a dedicated mode resource<br />Page mode : (0) Normal paging<br />Channel Description<br /> Channel type : (8) SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8)<br /> Subchannel : 0<br /> Timeslot number (TN) : 1<br /> Training sequence code (TSC) : 0<br /> Hopping RF channel : (0) Single RF Channel<br /> Absolute radio frequency channel number (ARFCN) : 575<br />Request reference<br /> Random access representation : 254 (FE hex)<br /> Establishment cause : Originating call and TCH/F is needed, or originating call and the network does not set NECI bit to 1, or procedures that can be completed with a SDCCH and the network does not set NECI bit to 1<br /> Random reference : 30<br /> FN modulo 42432 : 38177<br /> Representation : T1' = 28, T2 = 9, T3 = 29<br />Timing advance<br /> Timing advance value : 1<br />Mobile Allocation<br /> Length : 0<br />Rest Octets<br /> A compressed version of the Inter-RAT Handover Info message shall not be usedGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0tag:blogger.com,1999:blog-4026828946414047214.post-88714375590445547442011-12-07T00:25:00.001-08:002011-12-09T00:26:09.318-08:00CM Service Request<span style="font-weight:bold;">CM Service Request</span><br /><br />Time : 16:49:15.372<br />Vendor Header<br /> Length : 30<br /> Log Code (Hex) : 0x713A<br /> HW Timestamp : (64216447.50 ms) 17:50:16.448<br /> 1.25 ms fraction : 0.00<br /> CFN : 132<br /> 1.25 ms counter : 805506733158<br /> Direction : (1) To network<br /> Message length : 13<br />Skip indicator : 0<br />Protocol discriminator : (5) Mobility management messages<br />Message type : 36<br />Ciphering key sequence number<br /> Key sequence : (0) 0<br />CM service type<br /> Service type : (1) Mobile originating call establishment or packet mode connection establishment<br />Mobile station classmark<br /> Revision level : (2) Mobile station supporting R99 or later versions of the protocol<br /> ES IND : (1) "Controlled Early Classmark Sending" option is implemented in the MS<br /> A5/1 : (0) Encryption algorithm A5/1 available<br /> RF Power Capability : (0) class 1<br /> PS capability (pseudo-synchronization capability) : (1) PS capability present<br /> SS Screening Indicator (defined in TS 24.080) : 1<br /> SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS<br /> VBS notification reception : (0) No VBS capability or no notifications wanted<br /> VGCS notification reception : (0) No VGCS capability or no notifications wanted<br /> FC Frequency Capability : (0) (GSM900 only:) The MS does not support E-GSM or R-GSM<br /> CM3 : (1) The MS supports options that are indicated in classmark 3 IE<br /> LCS VA capability : (0) LCS value added location request notification capability not supported<br /> UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2.<br /> SoLSA : (0) The ME does not support SoLSA.<br /> CMSP: CM Service Prompt : (1) "Network initiated MO CM connection request" supported for at least one CM protocol.<br /> A5/3 : (0) Encryption algorithm A5/3 not available<br /> A5/2 : (1) Encryption algorithm A5/2 available<br />Mobile identity<br /> Odd/even indication : (0) Even number of digits<br /> Type of identity : (4) TMSI/P-TMSI<br /> TMSI/P-TMSI : Hex 0x6C00006FGPRS EDGE 3G EXPERThttp://www.blogger.com/profile/00879759149375395879noreply@blogger.com0